Serious Juggling > Unicycle parts

Unicycling Videos & Books.

Many additional unicycle parts available in store or by special order: a huge variety of components to repair unicycles by Torker, Sun, Avenir, CyclePro, Savage, Zephyr, Nimbus, Coker, Kris Holm, Schwinn, Miyata, Qu-Ax, Onza. Call store for advice.

Torker CX unicycle saddle
Torker CX unicycle saddle The Torker CX unicycle saddle meets all the basic needs in a beginner saddle but best suited for children under age 12. With sturdy plastic bumpers at the front and back, and molded of soft foam, you can fix up an old unicycle or set up a second seat and post for riders who are different heights. Seatpost bolt spacing: 5.7 cm (2.25 in.) between front and back bolts. Fits most posts, such as Kris Holm, Torker CX or DX, Schwinn, Semcycle, and others. Does not fit Miyata or Torker LX/AX/TX without purchasing a separate post.

Black
$19

 

 

UDC Club unicycle seat
UDC Club unicycle seat The UDC club unicycle seat black handle with black bumper.

Spinning unicycle spokes graphic.
$30

 

 

Torker LX seat with post
Torker LX seat with post The Torker LX replacement saddle and post provides an easy solution for any unicycle that uses a 25.4 mm seatpost needing both a new seat and post. Patterned after the Miyata saddle, this seat/post combo is more affordable than other comparable options, and is noticeably nicer than a basic unicycle saddle. The LX saddle offers softer foam than introductory models, and features a front handle for hopping and for increased control in mounting and riding. The front and back bolts under this saddle are 3.75 in. (9.5 cm) apart, so this saddle and post are only compatible with each other, or with Miyata posts and saddles.

All black with bumper and handle.
$35

 

 

Torker freestyle saddle
Torker freestyle unicycle saddle The Torker freestyle saddle features a high quality trials and freestyle design on a mid-range budget. With a low profile and wide, soft foam pad, this saddle compares well to the Kris Holm Fusion Street saddle. The front lift handle provides extra control for all levels of riding, and the flatter shape makes getting on and off the saddle easier. Original replacement on the 2010 DX 20" trials and LX Pro unicycles.

Black
$37

 

 

Schwinn Unicycle saddle
Schwinn Retro unicycle saddle A gel unicycle saddle gives you the extra cushion of gel padding with the lower height of a freestyle or trials saddle. Smooth edges with no seam along the tops provide extra comfort with minimal rubbing, and the lift handle in front gives extra control for skills and stability. A new gel seat makes an old unicycle feel comfortable again! Seatpost bolt spacing: 5.7 cm (2.25 in.) between front and back bolts. Fits most posts, such as Kris Holm, Torker CX or DX, Schwinn, Semcycle, and others. Does not fit Miyata or Torker LX/TX without purchasing a separate post.

Black saddle and white handle and bumper, white printed Schwinn logo.
$39

 

 

Onza Limey Gel Unicycle saddle
Schwinn Retro unicycle saddle The Onza Limey Gel unicycle saddle stands out from the crowd while keeping comfort a high priority. Smooth sides without seams reduce chafing, and the soft gel section in the middle helps keep you riding longer. Abrasion resistant sections on the sides protect the Union Jack design. The British invasion is here again! extra cushion of gel padding lower height of a freestyle or trials saddle. provide extra comfort with minimal rubbing, and the lift handle in front gives extra control for skills and stability. A new gel seat makes an old unicycle feel comfortable again! Seatpost bolt spacing: 5.7 cm (2.25 in.) between front and back bolts. Fits most posts, such as Kris Holm, Torker CX or DX, Schwinn, Semcycle, and others. Does not fit Miyata or Torker LX/AX/TX unicycles without purchasing a separate post.

Union Jack only
$40

 

 

Nimbus Gel saddle
Nimbus Gel saddles Nimbus Gel unicycle saddles give you the extra cushion of gel padding with the lower height of a freestyle or trials saddle. Smooth edges with no seam along the sides provide extra comfort with minimal rubbing, and the lift handle in front gives extra control for skills and stability. A new Nimbus Gel seat makes an old unicycle feel comfortable again! Seatpost bolt spacing: 5.7 cm (2.25 in.) between front and back bolts. Fits most posts, such as Kris Holm, Torker CX or DX, Schwinn, Semcycle, and others. Does not fit Miyata or Torker LX/TX without purchasing a separate post.

Red, orange, blue or all black only
$50

 

 

Kris Holm Fusion Street saddle
2010 Kris Holm Fusion Street saddles The Kris Holm Fusion Street saddle Seatpost bolt spacing: 5.7 cm (2.25 in.) between front and back bolts. Fits most posts, such as Kris Holm, Torker CX or DX, Schwinn, Semcycle, and others. Does not fit Miyata or Torker LX/TX without purchasing a separate post.

Orange/black, blue/black, grey/black, all black
$75 Orange, green, grey $65

 

 

Kris Holm Fusion Freeride saddle
2010 Kris Holm Fusion Freeride saddles The Kris Holm Fusion Freeride saddle is considered the ultimate in comfort for production unicycle saddles. The internal foam block is uniquely contoured with a channel down the center to alleviate pressure on the rider. The padding is piled high for softness, but still offers support and allows control of the unicycle for turns. A handle in front gives extra leverage and stability, and the back bumper absorbs impacts when the seat is dropped. The KH Fusion Freeride is the preferred saddle for many long distance riders and mountain unicyclists, or anyone who needs to upgrade the comfort of their unicycle. Seatpost bolt spacing: 5.7 cm (2.25 in.) between front and back bolts. Fits most posts, such as Kris Holm, Torker CX or DX, Schwinn, Semcycle, and others. Does not fit Miyata or Torker LX/AX/TX without purchasing a separate post.

blue/black, all black
$75

 

Kris Holm Fusion Freeride seat cover
Kris Holm Fusion Freeride replacement seat covers The Kris Holm Fusion Freeride replacement seat cover . Also fits Miyata and LX saddles.

white/black, red/black, orange/black, yellow/black, green/black, grey/black, all black
$19

 

 

Kris Holm rail adaptor: U style
Kris Holm rail type adaptor The Kris Holm rail adaptor bridges the gap to connect a unicycle saddle that has standard bolts to a rail-type bicycle seatpost. Instead of being limited only to seatposts made for unicycles, installing the adaptor opens up the many possible posts from the bicycle world that have standard rails to choose from. A brake lever mount is attached. Only fits Miyata, Torker LX, AX, or TX.
$29
 

 

Kris Holm Starfighter
Kris Holm starfighter The Starfighter, by Kris Holm, is an extension shaped like the end of a spoon that attaches to the brake lever on a Magura brake (sold separately). This wider surface makes braking easier, and increases control without getting in the way of riding. Unlike a bicyclist, a unicyclist's fingertips often face the end of the lever instead of wrapping around it, which makes the Starfighter an excellent addition to all Magura hydraulic HS33 brakes (old or new style).
$25
 

 

Kris Holm seat clamps
Kris Holm seat clamps The Kris Holm double bolt seat clamp keeps a strong grip on your seatpost height, while adding a splash of color (if you choose). This clamp fits all currently produced models of Kris Holm unicycles (seatpost diameter: 27.2 mm), but not other major brands of unicycles. Clamp colors match KH saddle colors. Adjustment requires a 5 mm Allen wrench.

white, red, orange, yellow, green, dark forest green, blue, grey or black
$10

 

 

Steel unicycle seat posts
black unicycle seat post, 1 inch wide, 40 cm long If your unicycle seatpost is too short or simply broken, we have a variety of widths, lengths, and materials in stock to help you get your uni back up to speed. The posts listed below are all steel, and have the common Schwinn style 4-bolt pattern: 5.7 cm (2.25 in.) between front and back bolts. Other styles (aluminum alloy, Kris Holm, LX/Miyata, Savage, or drilled posts) can be special ordered. Give us a call if you would like to ask or confirm which post is right for your unicycle!

Chrome 22.2 mm x 30 cm
$10

 

 


Chrome steel 22.2 mm x 40 cm
$14
 

Chrome 25.4 mm x 30 cm $12

Chrome 25.4 mm x 40 cm $14
Black 25.4 mm x 40 cm $19

 

 

Torker CX steel unicycle crank arms
Steel unicycle crank arms, 5 inch Torker CX steel unicycle crank arms are strong and simple, and are compatible with any basic cotterless uni hub with a square tapered axle. Pedal threads are 9/16", and crank arms are sold as a left and right pair. These are original replacements for Torker CX 16" wheels (4" cranks), 20" wheels (5" cranks), and 24" wheels (6" cranks). You will generally find square taper axles on Torker LX and AX, Semcycle, Schwinn, Sun, Coker, and some Zephyr, Savage, Cycle Pro models that do not have cotter pins through the cranks. The most common reason to replace crank arms is after riding with the left and right pedals and cranks on the wrong side with respect to the wheel's direction of travel. Look for the small "L" and "R" on the tip of each pedal and inside each crank arm, and take care when choosing which way to place the frame on the wheel. Be sure to face the seat forward! (The clamp is usually on the back of the frame, but check the crank arms for "L" and "R".) Always keep your pedals on tight (the "L" side goes in counter-clockwise) and watch out for any looseness or creaking. To remove crank arms requires a crank puller.

4 inch (102 mm) $10

 

5 inch (127 mm) $12
 

6 inch (152 mm) $14
 

 

Torker LX aluminum alloy unicycle crank arms
Aluminum alloy unicycle crank arms LX black: alloy cotterless The most common reason to replace crank arms is after riding with the left and right pedals and cranks on the wrong side with respect to the wheel's direction of travel. Look for the small "L" and "R" on the tip of each pedal and inside each crank arm, and take care when choosing which way to place the frame on the wheel. Be sure to face the seat forward! (The clamp is usually on the back of the frame, but check the crank arms for "L" and "R".) Always keep your pedals on tight (the "L" side goes in counter-clockwise) and watch out for any looseness or creaking. To remove crank arms requires a crank puller.

4 inch (102 mm) $19

 

5 inch (127 mm) $19
 

6 inch (152 mm) $19
 

6.75 inch (170 mm) $19
 

 

Odyssey Twisted PC pedals
Odyssey Twisted PC pedals
Odyssey Twisted PC Fade pedals
Odyssey Twisted PC platform pedals are made of plastic polycarbonate, 9/16, built in pins; comes with black replacement spindle caps. Call for 1/2 inch Schwinn compatible replacement sets in white or black.

Black
$14

 

 

White 1/2 inch older Schwinn compatible only.
$15

 

 

Brown
$17

 

 

Clear, graphite (translucent gray-blue), bone, burgundy, teal or midnight blue.
$18

 

 

Smoke/red, smoke/green, smoke/aqua blue, red/clear/blue, red/clear/green
$19

 

 

Eclat Surge PC pedals
Eclat Surge PC pedals blue Eclat Surge PC pedals have a durable polycarbonate body in a sculpted shape, with molded nubs for traction. This rare medium blue color will add a splash of color to any unicycle with 9/16” threads.

Blue $18

 

 

Odyssey Trail Mix pedals
Odyssey Trail Mix pedals black Odyssey Trail Mix platform pedals, 9/16, removable pins

Black$33

 

 

UDC Club pedals
UDC club pedals black plastic resin pedals have 9/16" threads (standard for unicycles and BMX but not other bikes) and are sold as a pair. (Make sure the "L" and "R" end up at your left and right feet respectively to prevent damage while riding.) These are the original replacements for UDC Club unicycles.

Black
$8

 

 

Alloy valve caps
Alloy unicycle valve cap rainbow Alloy: red, gold, blue or purple

$1.50

 

 

Novelty valve caps
Plastic novelty unicycle valve caps Plastic novelty valve caps

$2.50

 

 

Kenda Kontact tire
Kenda Kontact tires The Kenda Kontact tire is knurled for grip, nice all around directional tire, good for freestyle or flatland riding. Recommended inflation: 40-65 PSI.

Solid: white, red, orange, yellow, blue
Black with colored sidewall:
Red, orange or blue.
20" x 1.95" ISO: 50-406 $13

 

 

White, red, orange, yellow or blue
20" x 2.25" ISO: 58-406 $13

 

 

Kenda K-Rad tire
Kenda K-Rad tire The Kenda K-Rad tire balances smooth rolling with increased traction in a popular multi-purpose tire. The stable checkerboard knob pattern limits friction on the road, while grabbing onto trails or concrete. Knurling adds to traction control, and ribs between knobs strengthen the casing. Recommended inflation: 40-65 PSI. This non-directional tire is the original replacement for tires on Torker LX unicycles.

Black only
20" x 2.125" ISO: 54-406
$13
24" x 1.95" ISO: 50-507
$19
24" x 2.3" ISO: 58-507
$22

 

26" x 1.95" ISO: 50-559 $18

 

Primo The Wall tire
Primo The Wall tire The Wall tire by Primo is an excellent freestyle unicycle tire, makes tricks easier, grippy, high 85 psi.
20" x 2.10" ISO: -406

Red or blue
$20

Maxxis Creepy Crawler tire
Maxxis Creepy Crawler tire Kris Holm trials unicycle, Nimbus trials tire, Torker DX 20 inch trials unicycle tire replacement. Fits 19 inch rims.
20" x 2.5" ISO: 67-387 35-50 PSI

Black only
$33

 

 

Gusset "Pimp" tire
Green Gusset 20 inch unicycle tire Gusset "Pimp" tire smooth rolling, grippy, high PSI, freestyle tire
20" x 2.10" ISO: 57-406

White, pink
$20

 

Green
$28

 

 

Halo Twin Rail tire
Halo 26 inch purple unicycle tire The Halo Twin Rail tire has Puncture Protection System for reduced flats, black sidewall 50 PSI off road, max 85 PSI

24" x 2.2" ISO: 56-507
White, pink, green, or purple
$30

 

 

26" x 2.2" ISO: 56-559
White, pink, green, or purple
$30

 

 

36 inch Commuter tube
36 inch commuter unicycle tube This 36" x 2 1/4" inner tube fits all popular 36-inch unicycle (and bicycle) tires, including Coker, Nimbus, and Radial. Don't get caught miles away from your destination without a spare! Schrader valve.

$30

 

 

Deluxe unicycle stand
Deluxe unicycle stand All black, deluxe unicycle suspension stand. Comes in 2 pieces, keeps a unicycle off the floor.

$10

 

 

Unicycle parts
Quick-release clamp to adjust the seat height more easily: $5
Pedals Redline alloy platform black, silver: $15
Seats Torker DX: $45
Crank arms United steel: 89 mm, 140 mm, Qu-Ax, Sugino
Dust caps plastic or metal $4.95 pair
Hokey Spokes
Hokey Spoke in packaging
Hokey Spoke

As seen on HGTV's I Want That!

Hokey Spokes are brightly lighted electronic devices that attach to a unicycle (or bicycle) wheel of diameter 24 in. or larger. Each Hokey Spoke has a series of LEDs that flash in sequence to create patterns or even your choice of messages! For maximum visibility and image clarity, use up to 3 Hokey Spokes per wheel.

Hokey Spokes synchronize with each other automatically through infra-red, and can be programmed with a Palm handheld device. For personalized messages, up to 16 capital letters (and/or spaces) can be stored. Runs for approximately 48 hours per set of three AA batteries (not included.)

Red, orange, yellow or green $30 each
Rainbow $33
White or blue $40


Hokey Spokes display text pattern Hokey Spokes, spokes pattern Hokey Spokes flower petals pattern Hokey Spokes inverted flower pattern Hokey Spokes checkerboard pattern Hokey Spokes all active pattern

Contact SJ | Serious Juggling | Ordering | News

last updated 1/18/15
© Serious Juggling 1994-2015